fbpx
Insurica
Pay Now
Client Login

Avoid Winter Slip Ups

Winter months present additional hazards that are typically not factors for employees during warmer weather – specifically, slip and fall concerns. With snow and ice-covered conditions, you run the risk of taking major falls, which can lead to serious injuries.

Prevention

Education is essential in preventing winter weather-related injuries. Consider the following recommendations to prevent slip and fall injuries during the winter months:

  • Wear the proper footwear that provides traction on snow and ice. Footwear should be made of anti-slip material; avoid plastic and leather-soled shoes or boots.
  • Exercise caution when entering and exiting vehicles, and use the vehicle for balance and support.
  • Try to walk only in designated areas that are safe for foot traffic. If you notice that a walkway is covered in ice, walk on the grass next to the sidewalk, which will have more traction.
  • Avoid inclines that are typically difficult to walk up or down as they may be more treacherous in winter conditions.
  • Take small steps to maintain your center of balance, walk slowly and never run. When possible, walk with your hands free to maintain your balance. And despite the cold temperatures, avoid putting your hands in your pockets. This will help you better maintain your balance and allow you to break a fall should you slip.
  • Use handrails, walls or anything stationary to assist in steadying your feet.
  • Look ahead to the path in front of you to avoid hazards.
  • Test a potentially slippery area before stepping on it by tapping your foot on the surface first.
  • Remove debris, water and ice from all working walkways.
  • Steer clear of roof edges, floor openings and other drop-offs to avoid slipping hazards.
  • Sand or salt surfaces covered by ice or snow to provide traction.
  • Dry your shoes or boots on floor mats when entering a building.
  • Report trip and fall hazards immediately to your supervisor.
  • Seek shelter immediately in the event of severe weather conditions.

If You Begin To Slip…

  • Twist your body and roll backward to avoid falling forward and injuring your face.
  • Try to relax your body when you start to feel your legs give way.

If you are carrying a load, throw it off to the side so it does not land on you when you fall. This will also free your arms to help break your fall.

Source: © 2015, 2019, 2020 Zywave, Inc. All rights reserved.

About the Author

INSURICA
INSURICA

Share This Story

Stay Updated

Subscribe to the INSURICA blog and receive the latest news direct to your inbox.

Subscribe to the blog

Related Blogs

OSHA’s Safe and Sound Week Scheduled for Aug. 12-18

July 25th, 2024|Blog, Risk Management, Safety Tips|

Each year, more than 5,000 workers are killed on the job. Additionally, more than 3.6 million employees are seriously injured each year while at work. Because of this, the Occupational Safety and Health Administration (OSHA) holds a nationwide event each August called Safe and Sound Week, which promotes the importance of companies incorporating safety and health programs into their workplace. This year, the event runs Aug. 12-18, 2024.

2024 Midyear Market Outlook: Workers’ Compensation

July 24th, 2024|Blog, Risk Management, Trending|

Profitable underwriting results have generated favorable conditions across the workers’ compensation insurance market for nearly a decade. According to the National Council on Compensation Insurance (NCCI), the segment produced combined ratios of 84.5 and 84.9 in 2022 and 2023, respectively, demonstrating continued profitability.

CrowdStrike, the Most Important Cyber Accumulation Loss Event Since NotPetya, Highlights Single Points of Failure

July 23rd, 2024|Blog, Risk Management, Safety Tips, Trending|

In what is being called “the most important cyber accumulation loss event since NotPetya,” the July 19, 2024, global technology outage (CrowdStrike) will produce scores of insurance claims across a range of policies, test cyber policy wordings,and sharpen the industry’s focus on single points of failure.

Go to Top